- Amerex ABC Dry Chemical Fire Extinguishers
ABC or Multi-Purpose fire extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator. These extinguishers are suitable for types of fires involving ordinary combustibles, flammable liquids and energized electrical equipment.
- Amerex Carbon Dioxide Fire Extinguishers
CARBON DIOXIDE is discharged as a white cloud of “snow” which smothers a fire by eliminating oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-contaminating, odorless gas.
- Amerex Carbon Dioxide Wheeled Fire Extinguisher
Large volume CO2 protection provided in either 50 or 100 lb. (2 – 50 lb. cylinders) wheeled extinguishers. Rugged construction and easy to operate with a “quick opening” ‘T’ handle valve and horn mounted shut-off valve. A logical choice in areas where a Class B:C non-contaminating agent is required and where hand portable extinguishers do not provide adequate protection.
- Amerex Class D Fire Extinguishers
The Amerex “soft flow” extension applicator is particularly suited for fighting Class D fires. It allows the operator to stand away from the extreme heat and toxic fumes caused by burning material. The easily controlled, even discharge provides a non-dispersing application of the agent. The extension applicator may be quickly detached to provide a straight stream of chemical where greater range is required.
MODEL B570 contains a special blended Sodium Chloride-based dry powder extinguishing agent. Heat from the fire causes it to cake and form a crust excluding air and dissipating heat from burning metal. Metal fires involving magnesium, sodium, potassium, and sodium-potassium alloys can be successfully extinguished with this extinguisher. There is data showing that zirconium, uranium, titanium, and powdered aluminum fires can be controlled and extinguished with this unique extinguisher. Extinguishing Capacity Magnesium Chips: 4 ft.2 and/or 6 lbs. of metal Sodium or Potassium Spill: 5 ft.2 and/or 5 lbs. of metal Sodium or Potassium Spill Depth Over ”: 3 ft.2 and or 6 lbs. of metal Sodium Potassium Alloy Spill: 3 ft.2 and/or 2 lbs. of metal
MODEL B571 contains a copper extinguishing agent specially developed by the U.S. Navy for fighting lithium and lithium alloy fires. The copper compound smothers the fire and provides an excellent heat sink for dissipating heat. Copper powder has been found to be superior to all other known fire extinguishing agents for lithium metal fires. Not recommended for lithium-ion battery fires. Extinguishing Capacity 4 ft.2 and/or 5 lbs. of lithium
- Amerex Class D Wheeled Extinguisher
150 lb. Regulated Pressure SODIUM CHLORIDE
250 Lb. Regulated Pressure COPPER POWDERTwo choices for large volume Class D (flammable metal) protection. Model 680 (Sodium Chloride) is effective on magnesium, sodium,
potassium, and sodium potassium alloy fires. Model 681 (Copper Powder) designed specifically for fighting difficult lithium fires. Well
balanced for quick transport on 36” non-sparking rubber tread steel wheels. Both are pressurized with Argon and regulated to a low 125
psi to avoid disrupting the burning materials.This item requires special shipping, additional charges may apply.
- Amerex Halon 1211 Fire Extinguishers
HALON 1211 is a liquefied gas, pressurized with nitrogen, which discharges as a vapor causing no cold or static shock and no impairment of the operator’s vision. This “CLEAN” agent quickly penetrates difficult-to-see and hard-to-reach areas and leaves no residue. It is recommended for protection of delicate, sensitive, and expensive computers, electrical equipment, tapes and film, automotive and aircraft engines, laboratory chemicals and equipment.
- Amerex Halotron I Fire Extinguishers
Halotron™ I clean fire extinguishing agent discharges as a rapidly evaporating liquid, which is non-conductive, non-corrosive, and leaves behind no residue. Halotron™ I is the clean agent market leader with a history of successful real-world protection of valuable assets. From model scale aircraft to wide body commercial aircraft, from data centers to pharmaceutical and other industrial plants, the Halotron™ I agent has been used to extinguish the fire, limit damage and help reduce downtime that can be caused by other agents.
The Halotron™ I clean agent has been determined to be the most environmentally beneficial halocarbon agent on the market today that meets wide performance standards. The primary raw material in the agent is HCFC-123, which has an outstanding profile of near-zero ozone depleting potential (0.0098, CFC-11=1.0) and a low global warming potential (77, 100 yr. CO2 time horizon). State of the art atmospheric modeling completed in 2009 describes the smaller environmental footprint than HFC-based agents available for portable extinguishers.Ideal applications for these extinguishers include: data centers, laboratories, manufacturing plants, general office areas, computer rooms, telecommunication facilities, clean rooms, control rooms, warehouses, military electronics, vehicles including classic autos, boats, engine compartments, aircraft ramps, onboard aircraft and in facilities that service aircraft and any facility where dry chemical extinguishers could cause unacceptable damage or contamination.
- Amerex Halotron I Wheeled Extinguishers
65 lb. and 150 lb. Stored Pressure Halotron I™
The Amerex Halotron I™ extinguishers feature the same qualities found in all Amerex products and adds the convenience of a “clean” extinguishing agent. Halotron I™ extinguishing agent has proven itself as the leader in the hunt for an alternative “clean” agent by being the only alternative “clean” agent to obtain FAA approvals for both ramp use (ARFF Vehicle) and on-board an aircraft. Combining the quality of Amerex products with a proven alternative “clean” agent, the Amerex Halotron I™ wheeled extinguishers offer you the best value in the industry.
- Amerex High-Flow Fire Extinguishers
HIGH FLOW portable fire extinguishers for applications where discharge rates exceeding one pound per second are required as specified in NFPA 10. These extinguishers utilize the same hardware and are manufactured to the same UL specifications as Amerex compliance-rated products.
- Amerex Purple K Dry Chemical Fire Extinguishers
PURPLE K extinguishers contain specially fluidized and siliconized potassium bicarbonate dry chemical which is particularly effective on Class B flammable liquids and pressurized gases. It is electrically non-conductive. Purple K has been the choice of oil, gas, chemical and utilities industries as the preferred fire-fighting agent.
- Amerex Stored Pressure Wheeled Fire Extinguishers
50 and 125/150 lb. Stored Pressure – ABC, Regular, Purple K Dry Chemical
These commercial stored pressure extinguishers are available in a choice of two sizes and three chemical options. The carriage design on both sizes provides cage type protection for the agent cylinder as well as a well balanced platform for transportation and operation. The narrow width and easy rolling semi-pneumatic rubber tire wheels allow one person movement through narrow aisles, doorways and in confined areas. Chemical and pressure is sealed in the agent cylinder, ready for instant actuation and is always protected from contamination. Stored pressure wheeled extinguishers are less expensive to purchase as well as easier and less costly to maintain and service.
- Amerex Water Mist Fire Extinguishers
Water Mist is the ultimate extinguisher for Class A fires and for locations where a potential Class C (electrical) hazard exists. The fine
spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics
of the agent, and reduces scattering of burning materials. The Amerex Water Mist extinguishers contain de-ionized water (sold
separately) making them the best extinguishers for protection of hospital environments, telecommunication facilities, and “clean room”
manufacturing facilities. The Amerex Water Mist extinguishers are easy to use, maintain, and service. - Amerex Wet Chemical Fire Extinguishers
Wet chemical extinguishers are the best restaurant kitchen fire extinguishers you can purchase. The superior choice in national fire protection, each model has been tested and approved for the Class K listing by UL specifically for restaurant kitchen hazards. They contain a special potassium acetate based agent. The superior fire fighting capability of the Wet Chemical agent is placed exactly where you aim it with no dry chemical residue to clean up. This durable fire extinguisher features a steel cylinder and metal valves. The Models B260 and B262 are the ideal “KITCHEN USE” fire extinguishers. They supplement existing cooking equipment automatic system protection for an extra margin of safety.
- Amerex Z Series High-Performance Fire Extinguishers
Z-Series extinguishers are the ultimate choice in fire extinguishers for high hazard, frequent use, and extreme environment applications. Economical-less initial cost, lower maintenance costs, and greater reliability than cartridge-operated extinguishers. Amerex Z-Series extinguishers are available with a proprietary, zinc-enriched coating that resists corrosion for up to 12 years in severely salt contaminated environments.
Fast Flow models discharge at high flow rates, delivering more pounds of chemicals per second to supply the safest, and fastest three-dimensional “knock down” capability. Ideal for high-risk areas, Fast Flow models deplete faster than their Compliance Flow counterparts, and offer impressive results in the face of fast-moving fires.
Compliance Flow extinguisher has a higher UL rating, extended discharge times and lower flow rate, allowing it to meet, or exceed a diverse array of code requirements. Available with ABC or Purple K dry chemical agents, Compliance Flow models discharge at a rate that is roughly 40–50% slower than Fast Flow models, with the same initial range and package dimensions. If checking code requirement boxes is high on your to-do list, Compliance Flow models are likely the best choice for you.
- Amerex Halon 1211 Wheeled Fire Extinguisher
Halon 1211 is a liquified gas, pressurized with nitrogen, which discharges as a vapor causing no cold or static shock and no impairment of the operator’s vision. This “CLEAN” agent quickly penetrates difficult to see and hard to reach areas and leaves no residue. It is recommended for protection of delicate, sensitive and expensive computers, electrical equipment, tapes and film, automotive and aircraft engines, laboratory chemicals and equipment.
Quality industrial grade hardware, “CLEAN” agent, light weight, good discharge range and excellent fire extinguishing ability.
- Amerex Novec 1230 Wheeled Fire Extinguisher
The Novec 12430 wheeled fire extinguisher offers a number of unique benefits. 3M™ NOVEC 1230™ Fire Protection Fluid has a Global Warming Potential of 1 and an atmospheric life of just 5 days making it the long term sustainable choice that also has the greatest margin of safety of any of the chemical agents in the marketplace today.
- Featured Items
- Adapters
- Body Armor
- Boots
- Brackets & Mounts
- CAFS & Skid Units
- Caps & Plugs
- Cases
- Clearance
- Communications and Accountability
- Cord Reels
- Couplings
- Cribbing and Chocks
- Drip Torch
- Elbows
- Expansion Units
- Fire Blankets
- Fire Extinguishers
- Fire Hoses
- Fire Hose Accessories
- Fire Ladders
- Fire Station Equipment
- Floor Matting
- Foam
- Gauges
- Gear Bags
- GORE-TEX Products
- GPS
- Helmets
- Hi-Vis & Rain Gear
- Hose Clamps
- Hose Cutters
- Lights & Sirens
- Monitors
- Mounting Plates
- Name Panels
- Nozzles
- Akron Brass
- Adapter - Caps - Plugs
- Apparatus
- Apparatus Valves
- Appliances
- Cord Reel - Junction Boxes
- Field Repair Kit
- Flow Testing Equipment and Gauges
- Foam Eductors
- Foam Tubes
- Gate Valves and Wyes
- Handles
- Hose Hoist - Straps
- Hose Jacket - Hose Clamps
- Monitors
- Nozzles
- Pistol Grips
- Revel Scout
- Shutoffs and Playpipes
- Sprinkler Shutoffs
- Suction Strainer
- Valves
- Elkhart Brass
- Akron Brass
- PASS Devices
- Personal Protective Equipment
- Portable Water Tanks
- Rescue Equipment
- Rescue Saws
- Respiratory Protection
- Search & Rescue
- Shutoffs
- Station Wear
- Testing Kits
- Thermal Imaging
- Tools
- Truck Hardware
- Valves & Wyes
- Ventilation
- Weather Meters
- Wheel Chocs
- Wildland
- Wrenches
