• Filters
  • Sort by
    ...
  • C&S Madd Dog Foamer

    Low/Medium expansion foam tube.

  • C&S Supply Foam Eductor with Water Bypass and Metering Dial

    Foam eductor with water bypass and metering dial

  • Chemguard Class A Direct Attack Foam

    DIRECTATTACK foam agent concentrate is a Low-, Medium-, and High-Expansion Foam, Class A fire control foam concentrate formulated from specialty hydrocarbon surfactants, stabilizers, corrosion-inhibitors, and solvents. The foam agent solution has been proven effective on many deep-seated Class A fuel fires, such as tire fires, paper fires, coal fires, structure fires, and wild fires. The foam agent also provides superior cold weather performance.

    DIRECTATTACK foam agent concentrate can be proportioned from 0.1% to 1.0% in fresh, brackish, or sea water. When used as a pre-mixed solution, only fresh or potable water should be used if the premix is to be stored over long periods of time. Because of the extremely low proportioning rate, the foam agent concentrate offers outstanding economy in concentrate storage space, cost (compared to conventional 3% and 6% foam agents), and water hauling requirements. For example, a 5 gal (19 L) pail of foam agent concentrate produces 500 gal (1,893 L) of fire control foam agent solution at 1% concentration and produces 5,000 gal (18,927 L) of foam agent solution at 0.1% concentration.

    CHEMGUARD Class A foam concentrates combine foaming and wetting agents for use in a variety of firefighting applications. When proportioned with water, Class A concentrates reduce the solution surface tension and allow greater penetration of the foam into most Class A fuels.

    This item requires special shipping, additional charges may apply.

  • Chemguard Class A Plus Foam

    CHEMGUARD CLASS A PLUS foam concentrate is a low-, medium-, and high-expansion Class A fire control foam concentrate formulated from specialty hydrocarbon surfactants, stabilizers, and solvents. CLASS A PLUS foam solution is effective on many deep-seated Class A fires such as tire, paper, coal, and structure fires.

    CLASS A PLUS foam concentrate can be proportioned from 0.1% to 1.0% in fresh, brackish, or sea water. Because of the extremely low proportioning rate, the foam concentrate offers outstanding economy in concentrate storage space, cost (compared to conventional 3% and 6% foam agents), and product transport requirements. For example, a 5-gal (19 L) pail of foam concentrate produces 500 gal (1,893 L) of fire control foam solution at 1% concentration and produces 5,000 gal (18,927 L) of foam solution at 0.1% concentration.

    CHEMGUARD Class A foam concentrates combine foaming and wetting agents for use in a variety of firefighting applications. When proportioned with water, Class A concentrates reduce the solution surface tension and allow greater penetration of the foam into most Class A fuels.

    This item requires special shipping, additional charges may apply.

  • Chemguard Extreme Class A Foam

    Chemguard EXTREME is the first and only foam concentrate designed specifically for Compressed Air Foam Systems (CAFS). EXTREME is a non-corrosive, non-toxic, and biodegradable Class “A” foam concentrate. When mixed with water in the correct proportion, it drastically changes the properties of water. It reduces the surface tension of the water, and produces foam, which allows the water to cling to vertical or horizontal surfaces without run off. This allows the water to absorb more heat and provides greater penetration into Class “A” fuels.

    CHEMGUARD Class A foam concentrates combine foaming and wetting agents for use in a variety of firefighting applications. When proportioned with water, Class A concentrates reduce the solution surface tension and allow greater penetration of the foam into most Class A fuels.

    This item requires special shipping, additional charges may apply.

  • National Foam Knockdown Class A Foam

    Environmentally responsible Knockdown, Class A foam concentrate, is a unique new formulation providing unmatched firefighting performance and flexibility. Knockdown is specially designed for use in Class A/B foam systems and is excellent for Compressed Air Foam Systems (CAFS). This environmentally responsible formulation does not contain reportable components under SARA Title III, Section 313 of 40 CFR-372, or CERCLA.

  • National Foam Muni F3 Green 3%

    MuniF3 Green 3% is a superior quality, synthetic fluorine free foam concentrate, designed for municipal firefighters on Class A and B hydrocarbon fires.

  • National Foam Muni F3 Green Plus 3%

    MuniF3 Green Plus 3% is a superior synthetic fluorine free foam concentrate, designed for municipal firefighters on Class A and B fires. The UL/ULC listing for MuniF3 Green Plus 3% covers various blends of gasoline from unblended (i.e. sport racing) through, E5, E10 and up to E15 (i.e. 15% ethanol/gasoline blend).

  • National Foam Universal F3 Green 3%-3%

    UniversalF3 Green 3%-3% is a superior quality 3% synthetic fluorine free (FF) foam concentrate, designed for extinguishing and securing Class A and Class B chemical fires. UniversalF3 Green 3%-3% has been designed specifically for general emergency responders who are faced with a variety of risks in a range of situations.

    UniversalF3 Green 3%-3% is a patented combination of surfactants and other ingredients to produce a vapor sealing blanket of foam that rapidly spreads over the surface of the fuel to provide rapid control and extinguishment.

  • Phos-Chek 1% Class A/B Foam $99.70$1,096.70

    Phos-Chek® 1% Class A/B Foam

    Out of stock

  • Phos-Chek WD881 Class A Foam 5 Gallon Pail $121.00

    Phos-Chek® WD881 Class A Foam

    This item requires special shipping, additional charges may apply.

  • Ziamatic 4095 Foam Container Wrench

    This light weight, high-strength aluminum wrench will open most foam containers.

  • Akron 60 GPM Pyrolite In-Line Foam Eductor

    Akron Municipal Eductors feature a large, easy to read, and removable metering dial with settings between 0% and 6%. The Eductors are rated to flow at 200 psi (14 bar) inlet pressure and work effectively with nozzles rated from 50 to 100 psi (3 to 7 bar).

Close
Product Categories
Close My Cart
Close Wishlist
Recently Viewed Close

Close
Navigation
Categories
Newsletter

Welcome to our newly designed website!

We are proud to announce the launch of our new website. We've been working hard to create a better, more user friendly experience for our customers.


Please contact us for any questions you may have.


*Our website content will continue to evolve to make sure we're always providing you with the most up-to-date information.


Quote Cart