- BETE L Series Low Flow Nozzles
Spray Pattern of the L Evaporative Cooling Nozzle: Hollow Cone Fog, nearly as fine as P series.
Connection sizes: 1/8″, 1/4″
- BETE N Series Spiral Spray Nozzles
This BETE high-efficiency spiral was designed specifically with critical fire and explosion suppression applications in mind. These nozzles feature superior performance unequaled by traditional whirl nozzles.
- Sprays composed on droplets 30% to 50% smaller than conventional designs at equivalent pressures
- Extraordinarily large surface area of spray enhances evaporation and cooling
- Rugged, compact design
- Multiple concentric cone spray, unique to spiral pattern, maximizes contact
Connection sizes available: 1/2″ to 1 1/2″
- BETE P Series Fine Mist Nozzle
Finest fog of any direct pressure nozzle. Produces high percentage of droplets in the 25-400 micron range; ideal for dust suppression.
1/4″ connection.
- BETE PJ Series Impingement, Small, Fog, And Misting Nozzles
Finest fog of any direct pressure nozzle. Produces high percentage of droplets under 50 microns.
Connection sizes available: 1/8″, 1/4″
- BETE TF Series Spiral Spray Nozzles
Quenching, Scrubbing, and Evaporative Cooling Nozzles in a Wide Range of Flows and Angles; Full Cone Nozzles, Hollow Cone Nozzles.
- Atomization is achieved by the water shearing along the turns of the spiral
- Gives finest droplet size of any direct pressure nozzle
- Designed for droplet size, not evenness of pattern
- No internal parts
Connection sizes available: 1/8″ to 4″
- BETE TF29-180 Firebeter Ultra-Wide Full Cone Spiral Spray Nozzles
Excellent choice for deluge applications where there is little distance between nozzle and material being protected. Marine applications include deluge, foam, and water wall systems where the nozzles are subject to extreme weather conditions and exposure to seawater.
Connection size available: 1/2″
- BETE TFXP Series Spiral Spray Nozzles
Largest free passage in the original spiral nozzle invented by BETE and continuously improved!
Connection sizes available: 3/8″ to 4″
- Stang 2.5-inch Station Monitor Bladelock
Stang’s bestselling monitor, the 925 Station Monitor hits that sweet spot between capability and cost. Able to throw a stream of water over 200-feet, the 925 will securely manage up to 1000 GPM. The 925 combines the world class, hand-made construction and performance of all Stang guns.
- Stang 3-inch Station Monitor Bladelock
A popular apparatus monitor, the 930 Station Monitor sits comfortably between the 925’s affordability and the 940’s greater flowrate output. The 930 can shoot 1250 GPM more than 250-feet all on a perfectly balanced frame.
- Stang Monitor, 3-inch Deck Circular Handle
A popular apparatus monitor, the 930 Station Monitor sits comfortably between the 925’s affordability and the 940’s greater flowrate output. The 930 can shoot 1250 GPM more than 250-feet all on a perfectly balanced frame.
- Stang Monitor, 3-inch Deck P-Handle & Gauge/Guard
A popular apparatus monitor, the 930 Station Monitor sits comfortably between the 925’s affordability and the 940’s greater flowrate output. The 930 can shoot 1250 GPM more than 250-feet all on a perfectly balanced frame.
- Stang Monitor, Stangray, 3-inch Manual SLP, Lock Knob, Gauge/Guard, Retractable E Handle
A popular apparatus monitor, the 930 Station Monitor sits comfortably between the 925’s affordability and the 940’s greater flowrate output. The 930 can shoot 1250 GPM more than 250-feet all on a perfectly balanced frame.
- Stang Shapertip Nozzles
Inlets are 2.5” threaded female NH metal insert and incorporate an integral gasket seal. Outlets are available in 1/8” diametrical increments from 0.625” to 2.000”. Each straight stream nozzle incorporates an integral polypropylene copolymer flow straightening grid (vanes) to eliminate radial flow swirl preventing premature breakup of the water stream hence maximizing the effective water stream reach.
- C&S 1.5″ Stacked Tips
Available as dual or triple stacks. Constructed of anodized aluminum.
Please specify threading when submitting order.
- C&S Constant Flow Bumperless Nozzle
Flow from 15 GPM to 30 GPM. Constant Flow Nozzles are constructed of hard anodized aluminum and stainless steel internal components.
Please specify threading when submitting order.
- Featured Items
- Adapters
- Body Armor
- Boots
- Brackets & Mounts
- CAFS & Skid Units
- Caps & Plugs
- Cases
- Clearance
- Communications and Accountability
- Cord Reels
- Coupling Machine
- Couplings
- Cribbing and Chocks
- Drip Torch
- Elbows
- Expansion Units
- Fire Blankets
- Fire Extinguishers
- Fire Hoses
- Fire Hose Accessories
- Fire Ladders
- Fire Station Equipment
- Floor Matting
- Foam
- Gauges
- Gear Bags
- GPS
- Helmets
- Hi-Vis & Rain Gear
- Hose Clamps
- Hose Cutters
- Lights & Sirens
- Monitors
- Mounting Plates
- Name Panels
- Nozzles
- Akron Brass
- Adapter - Caps - Plugs
- Apparatus
- Apparatus Valves
- Appliances
- Cord Reel - Junction Boxes
- Field Repair Kit
- Flow Testing Equipment and Gauges
- Foam Eductors
- Foam Tubes
- Gate Valves and Wyes
- Handles
- Hose Hoist - Straps
- Hose Jacket - Hose Clamps
- Monitors
- Nozzles
- Pistol Grips
- Revel Scout
- Shutoffs and Playpipes
- Sprinkler Shutoffs
- Suction Strainer
- Valves
- Elkhart Brass
- Akron Brass
- PASS Devices
- Personal Protective Equipment
- Portable Water Tanks
- Rescue Equipment
- Rescue Saws
- Respiratory Protection
- Search & Rescue
- Shutoffs
- Station Wear
- Testing Kits
- Thermal Imaging
- Tools
- Truck Hardware
- Valves & Wyes
- Ventilation
- Weather Meters
- Wheel Chocs
- Wildland
- Wrenches
