3M™ Particulate Filter 2097/07184(AAD), P100, with Nuisance Level Organic Vapor Relief 100 EA/Case
NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for nuisance level organic vapor relief and for ozone protection up to 10X OSHA PEL.
The 3M™ Particulate Filter 2097, P100, with Nuisance Level Organic Vapor Relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odor relief from organic vapors that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against organic vapors or in environments that are immediately dangerous to life or health (IDLH). The 2097 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. This filter is commonly used in the following industries: agriculture, construction, general manufacturing, pharmaceuticals, primary metals.
The filter works with a wide range of facepieces, including 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M™ Adapter 502, the filter may also be used with 3M™ Respirator 5000 Series or 3M™ Cartridge 6000 Series. If used with the 3M™ Scott™ AV-632 Bayonet Adapter, the filter may be used with the 3M™ Scott™ AV-3000 HT and AV-3000 SureSeal facepieces. The filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain oil and non-oil based particles. The filter has been assigned the color code “Magenta” in the NIOSH system. Passing NIOSH’s P-series test criteria, the 2097 P100 filter provides at least 99.97 percent filter efficiency against particles.
Breathing hazardous particles can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Particulate Filter 2097 to help reduce exposure to certain particles.
RECOMMENDED PRODUCTS
NIOSH approved against certain organic vapors, acid gases, ammonia, methylamine or formaldehyde. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M™ Scott™ AV-3000 HT and AV-3000 SureSeal facepieces with 3M™ Scott™ AV-632 Bayonet Adapter.
Lightweight, 4 LED, 70 lumen, task light with 4 lighting modes that can be worn with or wihtout 3M hard hats. Weighing only about 78 grams, but able to run up to 150hrs on low setting and 74hrs on its high setting, this water resistant (IPX-4 rated) hard hat mounted head lamp is ideal for a wide range of industrial lighting applications. Comes with 3 AAA batteries and three attachment options.
3M™ PELTOR™ X5 Earmuffs are designed for very high noise situations, offering a Noise Reduction Rating (NRR) of 31 dB for both headband and hard hat-attached models. The high attenuation provided by these earmuffs is a result of the combination of specially-formulated foam in the earcups and cushions and the innovative spacer and cup design.
Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603.
Reviews
There are no reviews yet.