3M™ PELTOR™ X2 Earmuffs X2A/37271(AAD), Over-the-Head
3M™ Peltor™ X2A Over-the-Head Earmuffs, Hearing Conservation ,10 EA/Case
The X-Series earmuffs are 3M’s latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X2A is a lightweight, lower-profile earmuff designed for protection against low-to-moderate level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as “dielectric”.
– The wire headband offers consistent pressure over prolonged wearing periods
– Earcup pivot points tilt for optimum comfort and efficiency
– Replaceable ear cushions and foam liners (hygiene kit HYX2)
– Noise Reduction Rating (NRR)b 24 dB. CSA Class A
NOTE: The X-Series (over-the-head) headband version is electrically insulated -sometimes referred to as ”dielectric”. The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.
*The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
Hearing Protection Solutions Made Innovatively Easy™.
RECOMMENDED PRODUCTS
The 3M™ Aura™ Series Particulate Respirator 9205+, N95 is a three-panel, flat-fold disposable respirator designed to help provide comfortable, reliable worker protection against non-oil based particles.
X1 Earmuff for Full Brim Models
Lightweight, 4 LED, 70 lumen, task light with 4 lighting modes that can be worn with or wihtout 3M hard hats. Weighing only about 78 grams, but able to run up to 150hrs on low setting and 74hrs on its high setting, this water resistant (IPX-4 rated) hard hat mounted head lamp is ideal for a wide range of industrial lighting applications. Comes with 3 AAA batteries and three attachment options.
The 3M™ PELTOR™ CH-3 Headset is a next generation protective communication solution that helps workers stay protected in noisy environments while enabling clear communication on their handheld device. Incorporating the newly designed FLX2 connection jack, the CH-3 headset can be easily and reliably connected to a wide assortment of handheld devices.
Reviews
There are no reviews yet.