Akron 95 GPM Truck Foam System
Eight (8) quick change handle positions means less installation time. Improved pressure recovery provides greater versatility.
Features
– 8 quick change handle positions (easily changed after installation) means less installation time
– Specify inlet and outlet, 2”, 2 1/2” NPT or 2” standard groove
– Improved pressure recovery provides greater versatility
– Choose 60, 95, or 125 gpm (230, 360, or 475 lpm)
– Performs well with both 75 and 100 psi rated nozzles. 75 psi (5 bar) nozzles allow longer hose lays and less reaction force.
Easily changed to water line use Each Truck System Includes:
– Rugged brass by-pass eductor
– Foam metering dial
– One 2” In-line Swing-Out valve – with built-in check valve
– Two 1” In-line Swing-Out valves
– One 1” check valve
– Four Style 1477 remote controls Note: Each truck system is for a single tank operation. A two tank system requires one (1) additional 1” Swing-Out Valve, 1” check valve and 1477 Remote Control.
Note: Each truck system is for a single tank operation. A two tank system requires one (1) additional 1″ Swing-Out valve, 1″ check valve and 1477 remote control.
- Style: 3096
- Type: Truck System
- Weight: 4 lbs (1.8 kg)
- Material: Brass
- Length: 17 1/2" (445 mm)
- Width: 6 1/4" (159 mm)
- Height: 5 1/2" (140 mm)
RECOMMENDED PRODUCTS
The Turbojet is a constant gallonage nozzle (flow remains the same in all patterns) with multiple flow settings for operator flow control. Use the Turbojet one time and see why it’s the nozzle of choice by firefighters worldwide.
Unless otherwise specified on purchase order, nozzle will be shipped with attached Pistol Grip.
An Akron Brass Turbojet lightweight fog and straight stream tip Style 1703 with multiple fixed constant gallonage settings of 13-25-40-60 GPM (50-100-150-230 lpm) at 100 psi (7bar) shall be provided. The tip shall have spinning teeth, multiple pattern detents, a rubber bumper with raised lug for pattern identification, and extruded Pyrolite body and sleeve. The tip shall also have a minimum 110° angle at wide fog, a 1.5″(38 mm) swivel inlet, be capable of flushing without shutting down, and must meet all aspects of NFPA 1964 with test results available.
The Turbojet is a constant gallonage nozzle (flow remains the same in all patterns) with multiple flow settings for operator flow control. Use the Turbojet one time and see why it’s the nozzle of choice by firefighters worldwide.
Tough, lightweight ball shutoff with full-time restricted swivel base, ensuring the handle can be positioned for easy operation.
Available in cast brass finish.
Reviews
There are no reviews yet.