Amerex Halon 1211 Fire Extinguishers
$213.95 – $1,598.10
HALON 1211 is a liquefied gas, pressurized with nitrogen, which discharges as a vapor causing no cold or static shock and no impairment of the operator’s vision. This “CLEAN” agent quickly penetrates difficult-to-see and hard-to-reach areas and leaves no residue. It is recommended for protection of delicate, sensitive, and expensive computers, electrical equipment, tapes and film, automotive and aircraft engines, laboratory chemicals and equipment.
RUGGED
- 1-Year Manufacturer’s Warranty
- Stored Pressure Design
- Dependable Drawn-Steel Cylinders
- Durable High-Gloss Polyester Powder Paint
- All-Metal Valve Construction
- Temperature Range -65°F to 120°F
CLEAN
- Leaves no residue
- Reclaimed Halon 1211 restored to original military specification
- Uses all recycled gas in accordance with The Montreal Protocol
USER-FRIENDLY
- Maximum Visibility During Discharge
- Large Loop Pull Pin
- No Electrical Conductivity Back to the Operator
- No Thermal or Static Shock
- QR Coded and Bilingual Labels
MANUFACTURED AND TESTED
TO ANSI/UL STANDARDS
Complies with NFPA 10 Standard
ISO-9001 and ISO-14001 Certified
UL LISTED
CONFORMS TO TEST STANDARDS:
UL-1093 – ANSI/UL711
RECOMMENDED PRODUCTS
Wet chemical extinguishers are the best restaurant kitchen fire extinguishers you can purchase. The superior choice in national fire protection, each model has been tested and approved for the Class K listing by UL specifically for restaurant kitchen hazards. They contain a special potassium acetate based agent. The superior fire fighting capability of the Wet Chemical agent is placed exactly where you aim it with no dry chemical residue to clean up. This durable fire extinguisher features a steel cylinder and metal valves. The Models B260 and B262 are the ideal “KITCHEN USE” fire extinguishers. They supplement existing cooking equipment automatic system protection for an extra margin of safety.
Large volume CO2 protection provided in either 50 or 100 lb. (2 – 50 lb. cylinders) wheeled extinguishers. Rugged construction and easy to operate with a “quick opening” ‘T’ handle valve and horn mounted shut-off valve. A logical choice in areas where a Class B:C non-contaminating agent is required and where hand portable extinguishers do not provide adequate protection.
Z-Series extinguishers are the ultimate choice in fire extinguishers for high hazard, frequent use, and extreme environment applications. Economical-less initial cost, lower maintenance costs, and greater reliability than cartridge-operated extinguishers. Amerex Z-Series extinguishers are available with a proprietary, zinc-enriched coating that resists corrosion for up to 12 years in severely salt contaminated environments.
Fast Flow models discharge at high flow rates, delivering more pounds of chemicals per second to supply the safest, and fastest three-dimensional “knock down” capability. Ideal for high-risk areas, Fast Flow models deplete faster than their Compliance Flow counterparts, and offer impressive results in the face of fast-moving fires.
Compliance Flow extinguisher has a higher UL rating, extended discharge times and lower flow rate, allowing it to meet, or exceed a diverse array of code requirements. Available with ABC or Purple K dry chemical agents, Compliance Flow models discharge at a rate that is roughly 40–50% slower than Fast Flow models, with the same initial range and package dimensions. If checking code requirement boxes is high on your to-do list, Compliance Flow models are likely the best choice for you.
REGULAR extinguishers contain a siliconized sodium bicarbonate based dry chemical with free flowing and non-caking additives. Economical Class B & C protection with lower initial cost and recharging. This chemical smothers fires in flammable liquids and pressurized gases and will not conduct electricity back to the operator.
Reviews
There are no reviews yet.