Amerex Water Fire Extinguisher
Model 240 utilizes the cooling, soaking, and penetrating effect of a 45-55 foot stream of WATER. The 55-second discharge time makes it very effective for inexperienced operators for use on Class A fires.
RUGGED
- 5-Year Manufacturer’s Warranty
- Stored Pressure Design
- Polished Stainless-Steel Cylinders
- All Stainless Steel Valve
Construction - Exclusive Crevice-Free, Butt Welded
Cylinder - Temperature Range +40°F to 120°F
CLEAN
- Leaves no powder residue
USER-FRIENDLY
- Maximum Visibility During
Discharge - Large Loop Stainless Steel Pull Pin
- QR Coded and Bilingual Labels
Design: Hose & Nozzle
Capacity: 2.5 GAL
Range (Initial): 45-55 Ft
Discharge Time: 55 Sec.
Included Bracket: Wall
MANUFACTURED AND TESTED TO UL STANDARDS
Complies with NFPA 10 Standard
ISO-9001/ISO-14001 Certified
UL LISTED
CONFORMS TO TEST STANDARDS:
CAN/ULC-S507 – ANSI/UL626 &
CAN/ULC-S508 – ANSI/UL711
RECOMMENDED PRODUCTS
50 and 125/150 lb. Stored Pressure – ABC, Regular, Purple K Dry Chemical
These commercial stored pressure extinguishers are available in a choice of two sizes and three chemical options. The carriage design on both sizes provides cage type protection for the agent cylinder as well as a well balanced platform for transportation and operation. The narrow width and easy rolling semi-pneumatic rubber tire wheels allow one person movement through narrow aisles, doorways and in confined areas. Chemical and pressure is sealed in the agent cylinder, ready for instant actuation and is always protected from contamination. Stored pressure wheeled extinguishers are less expensive to purchase as well as easier and less costly to maintain and service.
ABC or Multi-Purpose fire extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator. These extinguishers are suitable for types of fires involving ordinary combustibles, flammable liquids and energized electrical equipment.
CARBON DIOXIDE is discharged as a white cloud of “snow” which smothers a fire by eliminating oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-contaminating, odorless gas.
The Amerex “soft flow” extension applicator is particularly suited for fighting Class D fires. It allows the operator to stand away from the extreme heat and toxic fumes caused by burning material. The easily controlled, even discharge provides a non-dispersing application of the agent. The extension applicator may be quickly detached to provide a straight stream of chemical where greater range is required.
MODEL B570 contains a special blended Sodium Chloride-based dry powder extinguishing agent. Heat from the fire causes it to cake and form a crust excluding air and dissipating heat from burning metal. Metal fires involving magnesium, sodium, potassium, and sodium-potassium alloys can be successfully extinguished with this extinguisher. There is data showing that zirconium, uranium, titanium, and powdered aluminum fires can be controlled and extinguished with this unique extinguisher. Extinguishing Capacity Magnesium Chips: 4 ft.2 and/or 6 lbs. of metal Sodium or Potassium Spill: 5 ft.2 and/or 5 lbs. of metal Sodium or Potassium Spill Depth Over ”: 3 ft.2 and or 6 lbs. of metal Sodium Potassium Alloy Spill: 3 ft.2 and/or 2 lbs. of metal
MODEL B571 contains a copper extinguishing agent specially developed by the U.S. Navy for fighting lithium and lithium alloy fires. The copper compound smothers the fire and provides an excellent heat sink for dissipating heat. Copper powder has been found to be superior to all other known fire extinguishing agents for lithium metal fires. Not recommended for lithium-ion battery fires. Extinguishing Capacity 4 ft.2 and/or 5 lbs. of lithium
Reviews
There are no reviews yet.