Amerex Water Mist Fire Extinguishers
$215.00 – $224.35
Water Mist is the ultimate extinguisher for Class A fires and for locations where a potential Class C (electrical) hazard exists. The fine
spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics
of the agent, and reduces scattering of burning materials. The Amerex Water Mist extinguishers contain de-ionized water (sold
separately) making them the best extinguishers for protection of hospital environments, telecommunication facilities, and “clean room”
manufacturing facilities. The Amerex Water Mist extinguishers are easy to use, maintain, and service.
RUGGED
- 5-Year Manufacturer’s Warranty
- Stored Pressure Design
- Stainless-Steel Cylinders
- Durable High-Gloss Polyester Powder Paint
- All-Metal Valve Construction
- Exclusive Crevice-Free, Butt-Welded Cylinder
- Temperature Range +40°F to 120°F
MR CONDITIONAL
- Non-magnetic Construction Tested by an Independent Agency for use in MRI Facilities to 11.7 Tesla (including wall hanger bracket)
CLEAN
- Non-toxic–Causes no Respiratory Problems
- 2-pack Charges 670 and 671 Deionized Water Extinguishing Agent Sold Separately
- Sanitary and Easy-to-Clean White Paint Finish
- No Powder Residue
USER-FRIENDLY
- Wand Provides Greatest Operator Safety
- Large Loop Stainless-Steel Pull Pin
- Maximum Visibility During Discharge
- No Electrical Conductivity Back to the Operator
- No Thermal or Static Shock
- Minimal Training–Simplest to use
- Most Economical Agent Available
- QR Coded and Bilingual Labels
B270:
- UL & ULC Rating: 2A:C
- Capacity: 1.75 Gal
- Range (Initial): 10-12 Ft.
- Discharge Time: 72 Sec.
- Included Bracket: NM Wall
B262:
- UL & ULC Rating: 2A:C
- Capacity: 2.5 Gal
- Range (Initial): 10-12 Ft.
- Discharge Time: 80 Sec.
- Included Bracket: NM Wall
MANUFACTURED AND TESTED
TO ANSI/UL STANDARDS
Complies with NFPA 10 Standard
ISO-9001 and ISO-14001 Certified
UL LISTED
CONFORMS TO TEST STANDARDS:
CAN/ULC-S554 – ANSI/UL8 &
CAN/ULC-S508 – ANSI/UL711
RECOMMENDED PRODUCTS
Model 240 utilizes the cooling, soaking, and penetrating effect of a 45-55 foot stream of WATER. The 55-second discharge time makes it very effective for inexperienced operators for use on Class A fires.
Large volume CO2 protection provided in either 50 or 100 lb. (2 – 50 lb. cylinders) wheeled extinguishers. Rugged construction and easy to operate with a “quick opening” ‘T’ handle valve and horn mounted shut-off valve. A logical choice in areas where a Class B:C non-contaminating agent is required and where hand portable extinguishers do not provide adequate protection.
150 lb. Regulated Pressure SODIUM CHLORIDE
250 Lb. Regulated Pressure COPPER POWDER
Two choices for large volume Class D (flammable metal) protection. Model 680 (Sodium Chloride) is effective on magnesium, sodium,
potassium, and sodium potassium alloy fires. Model 681 (Copper Powder) designed specifically for fighting difficult lithium fires. Well
balanced for quick transport on 36” non-sparking rubber tread steel wheels. Both are pressurized with Argon and regulated to a low 125
psi to avoid disrupting the burning materials.
This item requires special shipping, additional charges may apply.
HALON 1211 is a liquefied gas, pressurized with nitrogen, which discharges as a vapor causing no cold or static shock and no impairment of the operator’s vision. This “CLEAN” agent quickly penetrates difficult-to-see and hard-to-reach areas and leaves no residue. It is recommended for protection of delicate, sensitive, and expensive computers, electrical equipment, tapes and film, automotive and aircraft engines, laboratory chemicals and equipment.
Reviews
There are no reviews yet.