BETE TF Series Spiral Spray Nozzles
Quenching, Scrubbing, and Evaporative Cooling Nozzles in a Wide Range of Flows and Angles; Full Cone Nozzles, Hollow Cone Nozzles.
- Atomization is achieved by the water shearing along the turns of the spiral
- Gives finest droplet size of any direct pressure nozzle
- Designed for droplet size, not evenness of pattern
- No internal parts
Connection sizes available: 1/8″ to 4″
- The original spiral nozzle invented by BETE
- Also referred to as pigtail nozzles, corkscrew nozzles and/or helix nozzles
- High energy efficiency
- One-piece/no internal parts
- Clog-resistant performance
- High discharge velocity
- Male connection standard; female connection available by special order
- The TF24-150, the TF8NN, and TF8FCN (in brass) are FM approved
- Wide range of flow rates and spray angles
- Fine atomization
- Spray patterns: Full Cone.
- Spray angles: 50° to 180°
- Flow rates: 0.5 to 3320 gpm
- Spray patterns: Hollow Cone
- Spray angles: 50° to 180°
- Flow rates: 0.5 to 3320 gpm
RECOMMENDED PRODUCTS
Available as dual or triple stacks. Constructed of anodized aluminum.
Please specify threading when submitting order.
A popular apparatus monitor, the 930 Station Monitor sits comfortably between the 925’s affordability and the 940’s greater flowrate output. The 930 can shoot 1250 GPM more than 250-feet all on a perfectly balanced frame.
Flow from 15 GPM to 100 GPM. Constant Flow Nozzles are constructed of hard anodized aluminum and stainless steel internal components.
Please specify threading when submitting order.
Tip orifice sizes: 3/8″, 1/2″, 5/8″. Available in NP (NPSH) or NH (NST) Thread.
Please specify size and threading when submitting order.
Reviews
There are no reviews yet.