CMC Ultra-Pro Edge Protectors
The most sought-after edge protection available features super slick, high-performance material that not only protects your rope from sharp or rough edges, but also greatly reduces friction. The Ultra-Pro is lighter and easier to transport than edge rollers or similar devices and its lower profile avoids tipping often encountered with taller devices. It conforms to the edge, and prevents sharp bends in the rope. Protectors are available in two sizes: the Ultra-Pro 2 is for two ropes, and the Ultra-Pro 4 accepts four ropes. Carabiner holes in all four corners allow the Ultra-Pro to be tied off for safety or linked together for extended protection.
The most sought-after edge protection available features super slick, high-performance material that not only protects your rope from sharp or rough edges, but also greatly reduces friction. The Ultra-Pro is lighter and easier to transport than edge rollers or similar devices and its lower profile avoids tipping often encountered with taller devices. It conforms to the edge, and prevents sharp bends in the rope. Protectors are available in two sizes: the Ultra-Pro 2 is for two ropes, and the Ultra-Pro 4 accepts four ropes. Carabiner holes in all four corners allow the Ultra-Pro to be tied off for safety or linked together for extended protection.
- Super-slick, high performance material greatly reduces friction while protecting rope from sharp or rough edges
- Lighter and easier to transport than edge rollers
- Conforms to the edge while preventing sharp bends in rope
- Avoids the tipping hazard associated with taller devices
- Holes in all four corners allow device to be tied off or linked together for extended protection
- Ultra-Pro 2 accepts 2 ropes and is 16 x 6 in (41 x 15cm)
- Ultra-Pro 4 accepts 4 ropes and is 16 x 10 in (41 x 25cm)
RECOMMENDED PRODUCTS
The smaller 8 is preferred by many SWAT teams, climbers, cavers, and sport rappellers.
This lightweight alloy ascender with an ergonomic rubber handle is ideal for climbing ropes.
The MPD allows you to go from lowering to raising without changing hardware. More than nine years of research and development went into the patented Multi-Purpose Device (MPD), which features major innovations in advanced technical hardware for rope rescue professionals. The MPD’s high-efficiency pulley, with an integral rope-grab mechanism, allows it to be used as a lowering device on the main line and belay line systems and be quickly changed over to a raising system without switching out or replacing hardware.
CMC’s anodized aluminum swivels are available in two sizes to allow users to select the strength, weight and dimensions best suited to their specific needs. Whether used in a rescue haul system, helicopter operations, or rope access, the addition of a swivel can help prevent system lines from wrapping around each other, while at the same time reducing spin caused by loading a free-hanging rope.
Reviews
There are no reviews yet.