Firecom 110 and 210 Intercoms
110 Radio Interface
The simplest way to add effective communication to a one-person application. At the pump panel or while en route, the operator is able to clearly monitor the radio and transmit information without the interference of engine noise, horn blasts, or sirens. Connected to Firecom headsets, it provides vital hearing protection.
210 Radio Intercom
The 210 intercom system is specifically designed for vehicles with two crew members. You’ll get the same advanced features and the proven performance of our larger systems, but won’t pay extra for options you don’t need. The 210 intercom system enhances communication and protects your crew from hearing loss. It’s perfect for volunteer departments, brush trucks, command vehicles, tankers, and more.
Modular Jack(s) – connects the intercom unit to the headset modules using CA cables.
Radio Interface Jack – 9-pin D-Sub connector for a mobile radio interface cable.
Power Connector – connects the intercom unit to the vehicle’s power supply; 2-pin connector.
System Configuration – The 110 and 210 intercoms mount easily and cleanly below the dashboard. Headset modules can be located in any number of positions to provide easy access for headset plug-in. Both systems allow for an external headset module, and headsets can be interfaced with a handheld radio if desired.
110 and 210 Specifications
Dimensions
- 6.15″L x 1.28″H x 2.75″W
Weight
- 8.8 ounces
Power Requirements
- +11.5 VDC to +15 VDC
- 40 MilliAmps (minimum to 130 MilliAmps (maximum with radio keyed)
Receive Audio Input
- 1000 ohm nominal impedance
- 100 Millivolt RMS minimum audible signal
Transmit Audio Output
- 6 Volts RMS in 100 ohm maximum load
RECOMMENDED PRODUCTS
Compliant with NFPA 1901, the Firecom Headset Hanger Hook retains a wired or wireless under-helmet style headset during the severe g-forces of emergency maneuvers.
The WB505R DECT7 Wireless Base Station connects up to five Firecom 50- or 500-Series wireless headsets in full-duplex communication on the apparatus and the fire scene with up to 1,600 feet of range from the base station. Remotely activate radio PTT or select from two channels with headset dome controls on a connected DECT7 wireless headset. Supports up to 100 users in broadcast mode for training or educational applications. Transition to talk mode as needed. The W505R is USB-programmable for custom configurations and can be powered from the apparatus or with the included wall-charger.
Perfect for hearing protection when no helmet is required. Available in a wide selection of models with our no-glare powder coated frame, microphone flex boom, and volume control.
Headset options:
SE-48 – Standard Headset. Flex microphone boom. Plug Type: 0.25 inch, 3 conductor.
SE-48P – Mic Push-To-Talk Switch. Plug Type: 0.25 inch, 3 conductor.
SE-48RPTT – Radio Push-To-Transmit Switch. Plug Type: U-174/U, 4 conductor.
SE-48S – One Ear Cup Hollow and Slotted. Plug Type: 0.25 inch, 3 conductor.
SE-48SP – One Ear Cup Hollow and Slotted / Mic Push-To-Talk Switch. Plug Type: 0.25 inch, 3 conductor.
SE-48SRPTT – One Ear Cup Hollow and Slotted / Radio Push-To-Transmit Switch. Plug Type: U-174/U, 4 conductor.
SE-48RVC – Mic Disconnect Switch – Push On / Push Off. Plug Type: 0.25 inch, 3 conductor.
SE-48T – Mic Disconnect Switch – Toggle. Plug Type: 0.25 inch, 3 conductor.
The Firecom UH-51S wired headset delivers all the benefits of hands-free, full-duplex communication with your crew. Operating with a stand-alone intercom system or integrated with a mobile radio, the flexible design brings all crew members into constant communication. Behind-the-head band configuration with adjustable over-head strap easily accommodates use with helmets. Waterresistant and comfortable ear seal, extended operating temperature, and robust design make this headset ready for action in virtually any fireground environment. The single slotted dome does not provide hearing protection.
Reviews
There are no reviews yet.