Key Hose – Type II – Lightweight Single Jacket Forestry Hose
Engineered to combat the rigors of wildland fire fighting and ideal for changing forestry terrain, providing the ultimate in heat, abrasion and puncture resistance.
Engineered to combat the rigors of wildland fire fighting and ideal for changing forestry terrain, providing the ultimate in heat, abrasion and puncture resistance. A heat resistant ring spun outer jacket prevents damage from sparks and radiant heat. The outer jacket is finished with our iconic “Key-Lok” polyurethane based polymer impregnation so hose will remain mildew resistant and require no drying. Key Hose “smooth flow technology” delivers more water at higher pressures, all in a compact, lightweight design that goes where you need it, while easy to deploy and manage. Meets USDA-US Forestry Service Specification 5100-187 Type II.
Scope
The fire hose assembly supplied under this specification shall be constructed with superior quality materials. NFPA 1961 and forestry spec 5100-187 standards shall be observed in production of the assembly in order to ensure its quality and durability. Hose furnished under these specifications will have a potential service life warranty of 5 years barring mistreatment that would render it unfit for service. Upon delivery, the hose shall be free from defects in materials and workmanship.
Jacket Construction
The jacket will be woven evenly and be free of defects, including knots, lumps, or unsightly disfigurations that could jeopardize the integrity of the hose assembly. The warp yarn shall consist of ring spun polyester yarn. The use of filament or entangled yarn is expressly forbidden due to the lack of inherent abrasion resistance. The filler yarns shall be constructed of high strength, low elongation, filament polyester to reduce weight and increase flexibility. The jacket construction shall be a 1-2 woven twill pattern with the 2 over-crossing on the exterior of the jacket.
Abrasion
Hose assemblies are available with polymer impregnation that provide additional abrasion resistance. Standard color is yellow. Color shall be pure and even in each hose. Impregnated hose shall meet the requirements of USDA 5100-187 for abrasion resistance.
Lining
The lining shall be a single-ply extruded tube of synthetic polyurethane to resist ozone. The polyurethane tube shall adhere to the jacket to prevent delamination. The finished product will meet and exceed all potable water MIL-H-24606 standards for the manufacturing of lightweight fire hose. The use of the polyurethane lined fire hose is designed to increase packing ability and applications where lightweight fire hose is desired. Key Type II may be manufactured with a thin-wall high tensile 1800 psi EPDM rubber liner. Rubber lined products are an accepted alternative to polyurethane lined hose in accordance with 5100-187c Type II specifications.
Couplings
Expansion ring threaded or quarter-turn quick connect couplings available as specified by the end-user. Couplings shall meet 5100-108 minimum requirements.
Performance
The minimum burst test pressure, when tested in accordance to NFPA 1961, on all Key Type II diameters shall be 900 psi / 62 bar. Service test pressures stenciled on the hose shall be in accordance with current minimum requirements of NFPA 1962. Lengths available up to 100′.
Colors
RECOMMENDED PRODUCTS
The Turbojet is a constant gallonage nozzle (flow remains the same in all patterns) with multiple flow settings for operator flow control. Use the Turbojet one time and see why it’s the nozzle of choice by firefighters worldwide.
Unless otherwise specified on purchase order, nozzle will be shipped with attached Pistol Grip.
Assault Nozzles combine quality stream performance at a variety of pressures with the simplicity of a fixed orifice. Quality stream performance at a variety of pressures, combined with a durable and simple design makes it an unbeatable value. This product has a variety of applications. For use as deicing nozzles or in firefighting, mining or specialty vehicle applications, the Assault Nozzle is versatile and durable.
Unique double jacket construction, combining the supple high strength of Nylon 6.6 yarn and polyester filament fibers to form a highly abrasion resistant outer jacket and an inner jacket with increased tensile strength and durability.
Forestry Coupling- U.S.D.A. listed. Meets USFS Spec. 5100-108. Made of high-strength, lightweight air-craft aluminum 6061-T6 alloy. Hard-coated for corrosion and abrasion resistance. Complete with expansion rings and gaskets. Two rocker lugs on swivel only.
Available Sizes: 1” and 1-1/2”
Please specify threading and size when submitting quote.
Reviews
There are no reviews yet.