Super Vac Milwaukee M18 Battery PPV – V16-BL-SP
16″ PPV, with Shore Power, No Battery, No Charger
Compact. Lightweight. And reliable. Introducing the all-new Super Vac 16” variable-speed battery fan. This PPV works with Milwaukee Red Lithium 18V batteries, making it the most compatible PPV interface on the market. This nimble fan weighs only 47 lbs. and is 22.75″ tall x 23.50″ wide x 12″ deep, turning this fan into the industry’s lightweight champ.
POSITIVE PRESSURE VENTILATOR
A Super Vac, part number V16-BL-SP, 16″ variable-speed battery fan shall be supplied. The unit shall be designed with a lightweight roll-cage frame with strategic placement of bracing members to enable easy carrying of the fan.
The entire frame of the unit shall be constructed of aluminum that shall surround the shroud and a six-blade 16” airfoil propeller in a roll-cage design, which shall enhance lifting and user safety. The blade shall be constructed of polymer and driven by an battery-powered motor with a direct drive connection. Any ventilators utilizing belts, pulley, gears or additional shafts shall not be acceptable.
The unit shall be supplied with dual Milwaukee Red Lithium 18V battery system (dual 8Ah or 12Ah batteries) that is commercially available for low cost and ease of replacement. A dual 12Ah battery system shall enable the fan to operate for up to 40 minutes on a single charge delivering a maximum amount of airflow; the 9Ah battery system shall operate for up to 30 minutes. Fans using proprietary battery systems shall not be acceptable due to higher cost and limited supply.
The shroud and the safety grill shall be designed to provide maximum air velocity. The positive pressure ventilator shall have 180-degree tilt capability. The front and rear safety guards shall be designed to OSHA and U.L. Standards to prevent accidental contact with the blade.
The fan shall include shore power, allowing continuous operation off any 120-240V AC supply.
The variable-speed battery fan shall be designed with the following:
Motor: Totally Enclosed Variable-Speed DC
Power: 1 HP
Speed: 2,020 rpm
Airflow: 9,131 cfm (15,514 cmh)
Dimensions: 22.75″ x 23.50″ x 12″ (580mm x 595mm x 305mm)
Weight: 47 lbs. (21kg) (Weight with batteries and shore power)
The PPV shall have a minimum five (5) year warranty. The battery and charger are warranted by Milwaukee for three (3) years. See www.milwaukeetool.com for details. Motor shall be warranted for a minimum of three (3) years.
- Model: V16-BL
- Weight With Batteries and Shore Power: 47 lbs - 21 kg
- Motor: Totally Enclosed Variable-Speed DC
- Setback For Output Rating: 16 ft - 4.9 m
- Angle For Output Rating: 10°
- According to AMCA Output: 9,131 cfm - 15,514 cmh
Features
- Compact, Roll-Cage Frame: Features a tough yet lightweight aluminum frame to protect key components while providing a compact, lightweight design
- 180-Degree Tilt: Provides the largest tilt range among battery fans, allowing airflow to be directed virtually anywhere
- Milwaukee Red Lithium 18V batteries: Provide up to 45 minutes of max airflow, depending on battery selection
- Polymer Blade: Minimizes weight; Super Vac’s single-piece cast aluminum blade is available by request
- Precision-Spun Steel Shroud with StreamShaper Guard: Shroud provides durability with max airflow, while the StreamShaper guard allows for flexible setback; Air Cone Guard available by request
Battery Options
- Standard Battery: Milwaukee REDLITHIUM™ HIGH OUTPUT™ XC8.0 (2)
Run Time At Max Airflow: 30 minutes (with built-in battery gauge) - Optional Battery: Milwaukee REDLITHIUM™ HIGH OUTPUT™ HD12.0 (2)
Run Time At Max Airflow: 40 minutes (with built-in battery gauge)
- Standard Battery: Milwaukee REDLITHIUM™ HIGH OUTPUT™ XC8.0 (2)
*120-240V AC operation is standard (with optional delete).
RECOMMENDED PRODUCTS
18″ PPV, with Shore Power, No Battery, No Charger
24″ Smoke Ejector, 1.5 Hp, Electric Motor
This 24″ electric, single-speed Super Vac Smoke Ejector is designed for high-powered air movement for the largest jobs — perfect for departments with large residential structures of mid-sized commercial buildings in their jurisdicitions. This fan pulls smoke from structures using negative pressure but can be flipped around for positive pressure tactics. Smoke ejectors are most effective when working with natural airflow and not against Mother Nature (A 20-amp circuit is required to run the fan on 115 volts).
20″ Valor PPV, 1.5 Hp Variable Speed Motor
Powered by a RAE, TEAO variable-speed electric motor, this PPV fan provides a slightly larger PPV — perfect for jurisdictions with medium to large residential structures, as well as some commercial buildings, that seek precise air control movement and up to 33% more airflow than single-speed motors. This PPV runs on a 15-amp circuit. Featuring a patent-pending frame design that is simple and intuitive to position on the fireground, the Valor series is engineered to ease the toughest ventilation challenges.
16″ Smoke Ejector, 1/3 Hp, Electric Motor, Aluminum
A 16”, electric, single-speed, designed to be the perfect combination of size and power. Perfect for departments in need of an everyday. The toughest fan.
Reviews
There are no reviews yet.