• Filters
  • Sort by
    ...
  • 3M™ Versaflo™ Belt Extender TR-627X/37346(AAD), for TR-627 Easy Clean Belt

    The TR-627X Belt Extender enables the TR-600 PAPRs to be worn comfortably, when additional belt length is needed.

  • 3M™ Versaflo™ Powered Air Purifying Respirator Unit TR-802N/94242(AAD), Intrinsically Safe 1 EA/Case

    The TR-802N is an intrinsically safe replacement motor/blower for 3M Versaflo TR-800 series Powered Air Purifying Respirators. It does not include a filter, belt, battery, or charger. Combine with 3M Versaflo™ components to build a complete system.

  • Amerex ABC Dry Chemical Fire Extinguishers $51.30$195.95

    ABC or Multi-Purpose fire extinguishers utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator. These extinguishers are suitable for types of fires involving ordinary combustibles, flammable liquids and energized electrical equipment.

  • Amerex Carbon Dioxide Fire Extinguishers $184.30$392.90

    CARBON DIOXIDE is discharged as a white cloud of “snow” which smothers a fire by eliminating oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-contaminating, odorless gas.

  • Amerex Carbon Dioxide Wheeled Fire Extinguisher

    Large volume CO2 protection provided in either 50 or 100 lb. (2 – 50 lb. cylinders) wheeled extinguishers. Rugged construction and easy to operate with a “quick opening” ‘T’ handle valve and horn mounted shut-off valve. A logical choice in areas where a Class B:C non-contaminating agent is required and where hand portable extinguishers do not provide adequate protection.

  • Amerex Class D Fire Extinguishers $639.90$981.20

    The Amerex “soft flow” extension applicator is particularly suited for fighting Class D fires. It allows the operator to stand away from the extreme heat and toxic fumes caused by burning material. The easily controlled, even discharge provides a non-dispersing application of the agent. The extension applicator may be quickly detached to provide a straight stream of chemical where greater range is required.

    MODEL B570 contains a special blended Sodium Chloride-based dry powder extinguishing agent. Heat from the fire causes it to cake and form a crust excluding air and dissipating heat from burning metal. Metal fires involving magnesium, sodium, potassium, and sodium-potassium alloys can be successfully extinguished with this extinguisher. There is data showing that zirconium, uranium, titanium, and powdered aluminum fires can be controlled and extinguished with this unique extinguisher. Extinguishing Capacity  Magnesium Chips: 4 ft.2 and/or 6 lbs. of metal Sodium or Potassium Spill: 5 ft.2 and/or 5 lbs. of metal Sodium or Potassium Spill Depth Over ”: 3 ft.2 and or 6 lbs. of metal Sodium Potassium Alloy Spill: 3 ft.2 and/or 2 lbs. of metal

    MODEL B571 contains a copper extinguishing agent specially developed by the U.S. Navy for fighting lithium and lithium alloy fires. The copper compound smothers the fire and provides an excellent heat sink for dissipating heat. Copper powder has been found to be superior to all other known fire extinguishing agents for lithium metal fires. Not recommended for lithium-ion battery fires. Extinguishing Capacity 4 ft.2 and/or 5 lbs. of lithium

  • Amerex Class D Wheeled Extinguisher

    150 lb. Regulated Pressure SODIUM CHLORIDE
    250 Lb. Regulated Pressure COPPER POWDER

    Two choices for large volume Class D (flammable metal) protection. Model 680 (Sodium Chloride) is effective on magnesium, sodium,
    potassium, and sodium potassium alloy fires. Model 681 (Copper Powder) designed specifically for fighting difficult lithium fires. Well
    balanced for quick transport on 36” non-sparking rubber tread steel wheels. Both are pressurized with Argon and regulated to a low 125
    psi to avoid disrupting the burning materials.

    This item requires special shipping, additional charges may apply.

  • Amerex Halon 1211 Fire Extinguishers $213.95$1,598.10

    HALON 1211 is a liquefied gas, pressurized with nitrogen, which discharges as a vapor causing no cold or static shock and no impairment of the operator’s vision. This “CLEAN” agent quickly penetrates difficult-to-see and hard-to-reach areas and leaves no residue. It is recommended for protection of delicate, sensitive, and expensive computers, electrical equipment, tapes and film, automotive and aircraft engines, laboratory chemicals and equipment.

  • Amerex Halotron I Fire Extinguishers $146.60$899.09

    Halotron™ I clean fire extinguishing agent discharges as a rapidly evaporating liquid, which is non-conductive, non-corrosive, and leaves behind no residue. Halotron™ I is the clean agent market leader with a history of successful real-world protection of valuable assets. From model scale aircraft to wide body commercial aircraft, from data centers to pharmaceutical and other industrial plants, the Halotron™ I agent has been used to extinguish the fire, limit damage and help reduce downtime that can be caused by other agents.

    The Halotron™ I clean agent has been determined to be the most environmentally beneficial halocarbon agent on the market today that meets wide performance standards. The primary raw material in the agent is HCFC-123, which has an outstanding profile of near-zero ozone depleting potential (0.0098, CFC-11=1.0) and a low global warming potential (77, 100 yr. CO2 time horizon). State of the art atmospheric modeling completed in 2009 describes the smaller environmental footprint than HFC-based agents available for portable extinguishers.Ideal applications for these extinguishers include: data centers, laboratories, manufacturing plants, general office areas, computer rooms, telecommunication facilities, clean rooms, control rooms, warehouses, military electronics, vehicles including classic autos, boats, engine compartments, aircraft ramps, onboard aircraft and in facilities that service aircraft and any facility where dry chemical extinguishers could cause unacceptable damage or contamination.

  • Amerex Halotron I Wheeled Extinguishers

    65 lb. and 150 lb. Stored Pressure Halotron I™

    The Amerex Halotron I™ extinguishers feature the same qualities found in all Amerex products and adds the convenience of a “clean” extinguishing agent. Halotron I™ extinguishing agent has proven itself as the leader in the hunt for an alternative “clean” agent by being the only alternative “clean” agent to obtain FAA approvals for both ramp use (ARFF Vehicle) and on-board an aircraft. Combining the quality of Amerex products with a proven alternative “clean” agent, the Amerex Halotron I™ wheeled extinguishers offer you the best value in the industry.

  • Amerex High-Flow Fire Extinguishers $136.55$246.55

    HIGH FLOW portable fire extinguishers for applications where discharge rates exceeding one pound per second are required as specified in NFPA 10. These extinguishers utilize the same hardware and are manufactured to the same UL specifications as Amerex compliance-rated products.

  • Amerex Purple K Dry Chemical Fire Extinguishers $53.75$210.65

    PURPLE K extinguishers contain specially fluidized and siliconized potassium bicarbonate dry chemical which is particularly effective on Class B flammable liquids and pressurized gases. It is electrically non-conductive. Purple K has been the choice of oil, gas, chemical and utilities industries as the preferred fire-fighting agent.

  • Amerex Regular Dry Chemical Fire Extinguishers $51.05$194.70

    REGULAR extinguishers contain a siliconized sodium bicarbonate based dry chemical with free flowing and non-caking additives. Economical Class B & C protection with lower initial cost and recharging. This chemical smothers fires in flammable liquids and pressurized gases and will not conduct electricity back to the operator.

  • Amerex Stored Pressure Wheeled Fire Extinguishers

    50 and 125/150 lb. Stored Pressure – ABC, Regular, Purple K Dry Chemical

    These commercial stored pressure extinguishers are available in a choice of two sizes and three chemical options. The carriage design on both sizes provides cage type protection for the agent cylinder as well as a well balanced platform for transportation and operation. The narrow width and easy rolling semi-pneumatic rubber tire wheels allow one person movement through narrow aisles, doorways and in confined areas. Chemical and pressure is sealed in the agent cylinder, ready for instant actuation and is always protected from contamination. Stored pressure wheeled extinguishers are less expensive to purchase as well as easier and less costly to maintain and service.

  • Amerex Water Mist Fire Extinguishers $215.00$224.35

    Water Mist is the ultimate extinguisher for Class A fires and for locations where a potential Class C (electrical) hazard exists. The fine
    spray from the unique misting nozzle provides safety from electrical shock, greatly enhances the cooling and soaking characteristics
    of the agent, and reduces scattering of burning materials. The Amerex Water Mist extinguishers contain de-ionized water (sold
    separately) making them the best extinguishers for protection of hospital environments, telecommunication facilities, and “clean room”
    manufacturing facilities. The Amerex Water Mist extinguishers are easy to use, maintain, and service.

  • Amerex Wet Chemical Fire Extinguishers $226.25$273.25

    Wet chemical extinguishers are the best restaurant kitchen fire extinguishers you can purchase. The superior choice in national fire protection, each model has been tested and approved for the Class K listing by UL specifically for restaurant kitchen hazards. They contain a special potassium acetate based agent. The superior fire fighting capability of the Wet Chemical agent is placed exactly where you aim it with no dry chemical residue to clean up. This durable fire extinguisher features a steel cylinder and metal valves.  The Models B260 and B262 are the ideal “KITCHEN USE” fire extinguishers. They supplement existing cooking equipment automatic system protection for an extra margin of safety.

Close
Product Categories
Close My Cart
Close Wishlist
Recently Viewed Close

Close
Navigation
Categories
Newsletter

Welcome to our newly designed website!

We are proud to announce the launch of our new website. We've been working hard to create a better, more user friendly experience for our customers.


Please contact us for any questions you may have.


*Our website content will continue to evolve to make sure we're always providing you with the most up-to-date information.


Quote Cart